In order to reduce vehicle exhaust emissions, European and American countries have developed vehicles with start stop function. At this time, in order to meet the requirements of frequent starting vehicles, AGM series start stop batteries produced. Application Nowadays many modern motorcycles and almost all terrain vehicles (ATVs) on the market use AGM batteries to reduce the possibility of acid spillage after cornering, vibration or accident, and packaging reasons Senmart AGM batteries are currently used in luxury autos. Due to the vehicles become heavier and heavier, they are equipped with more electronic devices, such as navigation and stability control Senmart AGM batteries are being used to reduce vehicle weight and provide better electrical reliability Feature 1.Due to the lack of free electrolyte, AGM battery will not crack and leak in cold environment. 2.Senmart AGM battery are generally favored for their low maintenance and leak proof quality 3.The charging time is shorter than ordinary lead-acid battery. 4.AGM batteries are intrinsically safer and safer to use and to the environment. 5.It can be used or positioned in any direction Specification Product Characteristics * Initial capacity has been increased 5% more; * Large current discharge capability has been elevated 3% more; * Cycle Life has been increased 5% more. Certificate 鈥?ISO9001, ISO14001 鈥?GB/T-28001 鈥?CE, ROHS 鈥?GB/T22199-2008, GB/T18332.1-2009 Technical Curve AGM vs VRLA batteries Compared with VRLA and traditional lead-acid batteries, VRLA batteries and AGM batteries have some advantages. The battery can be installed in any position because the valve only works under over voltage fault. Since the battery system is designed to be restructured to eliminate gas emissions during overcharge, the indoor ventilation requirements are reduced and acid smoke is not emitted during normal operation. In addition to the smallest enclosed area, submerged battery gas emissions have little impact, and the threat to household users is very small. Therefore, wet batteries designed for long life can reduce the cost per kilowatt hour. In gel cells, the amount of free electrolyte released when the shell is damaged or exhausting is very small. There is no need (or ability) to check the electrolyte level or top up with water lost due to electrolysis, thus reducing inspection and maintenance requirements. While the wet battery can be maintained by automatic water spraying system or filling every three months. The requirement to add distilled water is usually due to overcharging. A well regulated system should not require top filling every three months.AGM Battery factory website:http://www.senmartbatt.com/agm-battery/